my green milis tip browned.
#1
Posted 17 September 2008 - 05:45 PM
68'' x 36'' x 30'' maintank
2 x 250w SE Lumenarc 12kk reeflux
1 x 250w SE Lumenarc 21kk Giesemann megachrome
1 x Daikin 1HP Compressor
1 x Bubble King Supermarines 200
1 x Deltec PF601 with Rowa C+
1 x Deltec FR509 with Rowaphos
1 x Deltec KM500
1 x Red Dragon II 170W
1 x Red Dragon 10m³
1 x Tunze Osmolator
1 x Sander Ozonizer 50mg
1 x UVC 11w
1 x Vortech MP40W
1 x Tunze TS24 with 7095
1 x Tunze 6100
1 x Tunze wavebox
1 x Aquatronica ACS Advance package

[ ]
#2
Posted 18 September 2008 - 09:55 PM
#4
Posted 21 September 2008 - 06:36 AM
Thanks & Best Regards,
Omar
91502745
#5
Posted 22 September 2008 - 02:20 AM
parameters last wk was..
CA 400
MG 1200
KH 8.6
ph 8.2
salinity 1.024+-
no3 almost 0.
68'' x 36'' x 30'' maintank
2 x 250w SE Lumenarc 12kk reeflux
1 x 250w SE Lumenarc 21kk Giesemann megachrome
1 x Daikin 1HP Compressor
1 x Bubble King Supermarines 200
1 x Deltec PF601 with Rowa C+
1 x Deltec FR509 with Rowaphos
1 x Deltec KM500
1 x Red Dragon II 170W
1 x Red Dragon 10m³
1 x Tunze Osmolator
1 x Sander Ozonizer 50mg
1 x UVC 11w
1 x Vortech MP40W
1 x Tunze TS24 with 7095
1 x Tunze 6100
1 x Tunze wavebox
1 x Aquatronica ACS Advance package

[ ]
#6
Posted 22 September 2008 - 06:21 PM
Too much flow will cause something like this?
i meant too much direct flow over the mili.
#7
Posted 23 September 2008 - 07:01 PM
68'' x 36'' x 30'' maintank
2 x 250w SE Lumenarc 12kk reeflux
1 x 250w SE Lumenarc 21kk Giesemann megachrome
1 x Daikin 1HP Compressor
1 x Bubble King Supermarines 200
1 x Deltec PF601 with Rowa C+
1 x Deltec FR509 with Rowaphos
1 x Deltec KM500
1 x Red Dragon II 170W
1 x Red Dragon 10m³
1 x Tunze Osmolator
1 x Sander Ozonizer 50mg
1 x UVC 11w
1 x Vortech MP40W
1 x Tunze TS24 with 7095
1 x Tunze 6100
1 x Tunze wavebox
1 x Aquatronica ACS Advance package

[ ]
#8
Posted 23 September 2008 - 08:42 PM
juz touch down SG today,
parameters last wk was..
CA 400
MG 1200
KH 8.6
ph 8.2
salinity 1.024+-
no3 almost 0.
[/quote
Bro,
Try to increase your MG and KH
4*2*2 + 2.5*1.25*1.25 (Decomming)
Return 1 * OR6500 /Quiet one 6000
Arctica DA-500B N AB2000I Little Giant
Deltec APF600 with AquaBee2000i
Algae scrubber power by 12 1 watt led(9 with 40 deg lens)
66 SSC 3 w LEDs panel over 2 ft
44 SSC 3 W LEDS panel over 2 ft
18 SSC 3 W LEDS panel over 1 ft
2 blue SSC strip as nitelight
#9
Posted 23 September 2008 - 10:15 PM
68'' x 36'' x 30'' maintank
2 x 250w SE Lumenarc 12kk reeflux
1 x 250w SE Lumenarc 21kk Giesemann megachrome
1 x Daikin 1HP Compressor
1 x Bubble King Supermarines 200
1 x Deltec PF601 with Rowa C+
1 x Deltec FR509 with Rowaphos
1 x Deltec KM500
1 x Red Dragon II 170W
1 x Red Dragon 10m³
1 x Tunze Osmolator
1 x Sander Ozonizer 50mg
1 x UVC 11w
1 x Vortech MP40W
1 x Tunze TS24 with 7095
1 x Tunze 6100
1 x Tunze wavebox
1 x Aquatronica ACS Advance package

[ ]
#10
Posted 23 September 2008 - 11:25 PM
In few cases, the tips are burnt, is the coral place very high up?
#11
Posted 23 September 2008 - 11:38 PM
with 2 x 250 12kk reeflux lumenarc reflector..
another green mili looks like its having the same prob.. bit very minor.
the other colours like pink are doing juz fine.
68'' x 36'' x 30'' maintank
2 x 250w SE Lumenarc 12kk reeflux
1 x 250w SE Lumenarc 21kk Giesemann megachrome
1 x Daikin 1HP Compressor
1 x Bubble King Supermarines 200
1 x Deltec PF601 with Rowa C+
1 x Deltec FR509 with Rowaphos
1 x Deltec KM500
1 x Red Dragon II 170W
1 x Red Dragon 10m³
1 x Tunze Osmolator
1 x Sander Ozonizer 50mg
1 x UVC 11w
1 x Vortech MP40W
1 x Tunze TS24 with 7095
1 x Tunze 6100
1 x Tunze wavebox
1 x Aquatronica ACS Advance package

[ ]
#12
Posted 23 September 2008 - 11:45 PM
#13
Posted 25 September 2008 - 04:02 AM
sometimes as in the pulsing mode..
but the polyps are moving randomly.
68'' x 36'' x 30'' maintank
2 x 250w SE Lumenarc 12kk reeflux
1 x 250w SE Lumenarc 21kk Giesemann megachrome
1 x Daikin 1HP Compressor
1 x Bubble King Supermarines 200
1 x Deltec PF601 with Rowa C+
1 x Deltec FR509 with Rowaphos
1 x Deltec KM500
1 x Red Dragon II 170W
1 x Red Dragon 10m³
1 x Tunze Osmolator
1 x Sander Ozonizer 50mg
1 x UVC 11w
1 x Vortech MP40W
1 x Tunze TS24 with 7095
1 x Tunze 6100
1 x Tunze wavebox
1 x Aquatronica ACS Advance package

[ ]
#14
Posted 25 September 2008 - 08:24 AM
Long term shortage of KH will cause burn tips especially to those area slightly low in flow
FYI, my salifert test kit reading was 10 but lamotte kit gives me 8.
Imagine what happen when i keep at 8-9 before discovering the difference
Old picture of burn tips. Now, it is almost fully recovered. (Just boost up KH)
Edited by wonder, 25 September 2008 - 08:32 AM.
#15
Posted 26 September 2008 - 12:41 AM
notice more of the tips are burnt
pink,green milis..
the pink milis that have top branches facing the direct light upwards also starting to turn brown.
so to be safe.. kh 10 is better?
Edited by ReDDeviLs, 26 September 2008 - 12:41 AM.
68'' x 36'' x 30'' maintank
2 x 250w SE Lumenarc 12kk reeflux
1 x 250w SE Lumenarc 21kk Giesemann megachrome
1 x Daikin 1HP Compressor
1 x Bubble King Supermarines 200
1 x Deltec PF601 with Rowa C+
1 x Deltec FR509 with Rowaphos
1 x Deltec KM500
1 x Red Dragon II 170W
1 x Red Dragon 10m³
1 x Tunze Osmolator
1 x Sander Ozonizer 50mg
1 x UVC 11w
1 x Vortech MP40W
1 x Tunze TS24 with 7095
1 x Tunze 6100
1 x Tunze wavebox
1 x Aquatronica ACS Advance package

[ ]
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users













